Please contact our customer service department if you have any queries regarding the fitting of your safety device, and we will be happy to assist. The advantage of this type of arrangement is that you do not have to remove the safety device to operate the blind and therefore provided the retaining device is properly fitted, there should be no instance of the chain hanging free. Please see the instructions supplied with your blind for full details on how to fit the supplied safety device.ĭeluxe Sidewinder Headrail - When orderding a bespoke blind with this headrail type you will be supplied with a retaining device, which should be fitted to keep the chain taught to prevent children from getting tangled up on the chain. So when ordering a bespoke roman blind using this fabric then your blind will come with a child safety device to help prevent injury. The hooks are adjustable and offer a small degree of adjustment on the finished length, but it is important to measure the pole width or track accurately for this kind of heading.Īt Terrys Fabrics we take child safety very seriously. The curtains come with hooks attached, making the whole experience that much easier. The curtain heading contains buckram which is used to create a flat section when closed and even folded pleats. For a track the curtain will sit below the track, with the top of the curtain slightly below (not touching) this provide a nice finish. The curtain should hang from the bottom eye of the ring that is connected to the pole. This heading gives a fullness of approximately 2 times the width of a track or the pole excluding finials. It is not adjustable and fits the pole or track it has been customised for. Triple pinch pleat is a heading that is tailored to an exact finished width. The curtain will fold back in it’s defined pleats providing a more precise stack back and when opened the curtain will have structured equal pleats when closed. This sophisticated heading, provides a more formal pleat. These are usually adjustable and offer a small degree of adjustment on the finished length, but it is important to measure the pole width accurately for this kind of heading. Special hooks called stab hooks are inserted into the back of each pleat to facilitate hanging (these are supplied with your curtains). The curtain heading contains robust stiffening which is used to crisp folds, grouped in pairs, which are pinched together at the base of the stiffening to form fan shaped pleats. This type of heading works best on a curtain pole and is not suitable for use with curtain tracks. This heading gives a fullness of approximately 2.2 times the rail width.īased on the rail size you have given, we would recommend ((Widths per curtain)) widths per curtain giving you a fullness of ((Widths per curtain)) times rail width. This is a good feature if you are limited by space or simply like lots of light in the room.ģ inch double pinch pleat heading is hand-tailored to an exact finished width which is not adjustable and which only fits the window it has been customised for. Eyelets are particularly good as a curtain that “stacks back”, meaning when open each curtain will fold back tightly either side of the window. They create wide folds of fabric which fall into soft columns, rather than tight gathered or a hand tailored heading. They are placed at regular intervals and in an even number, across the top edge of the curtain. This eyelet heading is constructed by punched metal eyelets into a lightly stiffened curtain heading. Please be aware that you require at least 5cm clearance above your pole to allow for the upstand of the heading above the pole. The eyelets are approximately 40mm in diameter, and are suitable for curtain poles up to 30mm in diameter. Please note that all curtains over one width per curtain will contain one or more fabric joins. We require the finished length to be supplied from the top of the pole, and the curtain will be made slightly longer then this to accommodate the additional 4cm (approx.) which sits above the pole.īased on the length of the pole you have provided, we would recommend ((Widths per curtain)) widths of fabric in each curtain giving you a fullness of ((Widths per curtain)) times rail width. Curtains with an eyelet heading are only suitable for use on poles and preferably metal ones to avoid wear and tear by the eyelets.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |